HOME > En Linear Unit > En Linear Slider Belt

Products on this page are available only in Asian countries

Linear Slider

Belt Drive

LEZ 1

LEZ1.png

  • Aluminium profile, miniature linear guide LFS-8-2
  •  No-play feed with toothed belt drive
    - toothed belt with 3 mm interval, width 9 mm
  • Feed per turn: 60 mm
  • Repeatabilityless than or equal to ± 0.2 mm
  • Max. feed. 1.5 m/s
 
Guides and shaft slides also available in a stainless version

Options:
  • Special 100 mm raster lengths to order, max. 6000 mm
  • Securing with integrated M6 tapped rail, raster 50 mm 


LEZ 1G

LEZ1G.png

  • Aluminium profile with midget linear guide LFS-8-1
  • Clearance-free feed with timing belt feed  axis - timing belt with 3 mm pitch, width 15 mm
  • Feed 2.4 m/s, at the most
  • Shaft slide WS 1 L 126 x W 72 mm 
  • Repetitive accuracy less or equal ± 0.2 mm
  • Limit and/or reference switch Accuracy < 0.1 mm
  • Available in lengths up to 2.05 m
  • Motor can be mounted on both sides due to an extended shaft end on the driving side
  • Numerous combination possibilities due to additional special and angle profiles
  •  Integrated reference switch

Highlight:

  • Feeds and Shaft Slides are also available in Rust-Proof Designs!


LEZ 2

LEZ2.png

  • Aluminium profile with miniature linear guide LFS-8-5
  • No-play feed with toothed belt drive-toothed belt with 5 mm interval,width 25 mm
  • Max. feed. 5 m/s
  • Shaft slides WS 3, L 176 × W 130 mm
  • Feed per turn: 70 mm
  • Repeat accuracyless than or equal to ± 0.2 mm
  • available in lengths up to 6,000 mm
 
Guides and shaft slides also available in a stainless version


Options
  • Special 100 mm raster lengths available to order, max. 6000 mm
  • Also as direct drive with
    - stepper motor
    - Servomotor
  •  Overrun limit switch with lead (only integrated in conjunction with drive module)


LEZ 3

LEZ3.png

  • Aluminium profile, miniature linear guide LFS-8-4
  • No-play feed with toothed belt drive, toothed belt with 5 mm interval, width 25 mm
  • Max. feed. 5 m/s
  • Shaft slides WS3, L176 × W130 mm
  • Feed per turn:
    70 mm or 150 mm
  • Repeat accuracy less than or equal to ± 0.2 mm
  • Limit or reference switch accuracy < 0.1 mm
  • Available in lengths up to 6,000 mm
  • Motor modules can be flange-mounted on left or right side

Guides and shaft slides also available in a stainless version


Options:
  • Special 100 mm raster lengths available to order, max. 6000 mm


LEZ 9

LEZ9.png

The linear units in the LEZ series with toothed belt feed feature a modular set-up and are suitable for quick positioning in the area of installation automation and machine handling. 

Due to their sturdy and rigid aluminium constructions they are primarily used where work pieces need to be processed or transported. 

The patented shaft slides with ball races are used as guide slides. All LEZ series linear units can also be supplied with the matching drive units as well as special connecting angles, allowing various combinations in cross, H-, and multi-axle configurations.


Characteristics

  • Backlash-free feed with belt drive
  • Aluminium profile, Linear guide LFS-8-7
  • Toothed belt with 3 mm gapping width 15 mm
  • Repeat accuracy smaller or equal ± 0.2 mm
  • Feed max. 2 m/s
  • Shaft slide WS 11/70
    L 96 x W 95 mm
Options:
  • Special lengths in a grid 100 mm
  • Stepper Motor or servo motor
  • Drive contro