HOME > En Motion Control > En Control IC

MCX501

High Performance 1 axis motion Control IC

mcx501.jpg

MCX501 is 1-axis motion control IC which can control either stepper motor driver or pulse type servo motor for position and speed control and can perform trapezoidal/smooth S-curve driving as acceleration/deceleration drive. This IC is equipped with speed range-free and it enables us to set the drive speed from 1pps to 8Mpps by a 1pps unit without speed multiple.

  • Speed range-freeNew!
  • Various acceleration/deceleration driving mode
  • Various synchronous actions
  • Built in timerNew!
  • Split pulseNew!
  • Automatic home search
  • Integral input filter built-in
  • Maximum drive speed 8Mpps (When CLK is 20MHz, maximum speed is 10Mpps.)
  • Package size 64 pin QFP






MCX302

2 Axis Motion Control IC

mcx302.jpg

MCX302 is 2-axis motion control IC which can independently control 2 axes of either stepper motor driver or pulse type servo motor for position and speed control. This IC is equipped with automatic home search and other various functions as below.
  • Parabolic S-curve / trapezoidal acceleration / deceleration driving.
  • Automatic deceleration for non-symmetrical trapezoidal drive.
  • Automatic home search.
  • Integral filter for input signal built-in.
  • Maximum drive speed   4Mpps
  • 100-pin plastic QFP type.
  • Pin-compatible with MCX312.


MCX312

2 Axis Motion Control IC with Interpolation

mcx312.jpg

MCX312 is 2-axis motion control IC which can independently control 2 axes of either stepper motor driver or pulse type servo motor for position and speed control. In addition, it can perform 2-axis linear, circular and bit pattern interpolation (bit pattern interpolation is executed by bit data from CPU). Multichip axes linear interpolation is also possible.

  • 2-axis linear / circular /continuous interpolation
  • Parabolic S-curve / trapezoidal acceleration / deceleration driving.
  • Automatic deceleration for non-symmetrical trapezoidal drive.
  • Integral filter for input signal built-in.
  • Multichip axes linear interpolation.
  • Maximum drive speed    4Mpps
  • 100-pin plastic QFP type.


MCX304

4 Axis Motion Control IC

mcx304.jpg

MCX304 is 4-axis motion control IC which can independently control 4 axes of either stepper motor driver or pulse type servo motor for position and speed control. This IC is equipped with automatic home search and other various functions as below.

  • Parabolic S-curve / trapezoidal acceleration / deceleration driving.
  • Automatic deceleration for non-symmetrical trapezoidal drive.
  • Automatic home search.
  • Integral filter for input signal built-in.
  • Maximum drive speed    4Mpps
  • 100-pin plastic QFP type.


MCX314As / MCX314AL

4 Axis Motion Control IC with Interpolation

mcx314as.jpg

MCX314As is 4-axis motion control IC which can independently control 4 axes of either stepper motor driver or pulse type servo motor for position and speed control. In addition, it can perform 2/3-axis linear interpolation, CW/CCW circular interpolation, 2/3-axis bit pattern interpolation and continuous interpolation.

  • 32-bit circular / linear interpolation.
  • Non-symmetrical parabolic S-curve / trapezoidal acceleration / deceleration driving.
  • Integral filter for input signal built-in.
  • Maximum drive speed    4Mpps
  • 144-pin plastic LQFP type.
  • Power voltage  MCX314As :+5V
  • Power voltage  MCX314AL :+3.3V